Oozing Goo - The Lava Lamp Syndicate

I need to filter pump a grande. How do I remove the cap?

Views: 234

Reply to This

Replies to This Discussion

If the grande is newer it is more of a pain than the giant.... That being said, I used a screwdriver to open mine. I just slid a (thin-straight edge) screwdriver under the lip and slowly pulled back. I worked my way all around the edge and then pulled with gloved hands. After pumping, you can replace the top by having a friend apply pressure to the top as you slowly use the handle of the screwdriver to re-crimp the top back on. It takes a little while to do it this way, but mine is fine and does not leak at all.
Best of luck!
Roberta "Bert"
6-ft-under.com
Can't u break the stem of the globe prying up on the cap with a screwdriver?

Reply to Discussion

RSS

Latest Activity

SpaceyNate is now a member of Oozing Goo - The Lava Lamp Syndicate
Tuesday
𝖉𝖎𝖗𝖊𝖍𝖊𝖆𝖗𝖙 is now a member of Oozing Goo - The Lava Lamp Syndicate
Sunday
Muzzy Z is now a member of Oozing Goo - The Lava Lamp Syndicate
May 14
Profile IconClark Harding, Brian and Adam joined Oozing Goo - The Lava Lamp Syndicate
May 11
Greg Lockhart replied to Jsmooth's discussion Bubble Elimination
May 3
Chris updated their profile
Apr 29
Mark posted a discussion
Apr 27
LavaLew is now a member of Oozing Goo - The Lava Lamp Syndicate
Apr 25

GooHeads

© 2026   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service