Hey there, I decided to fire up my lava lamp that's been hidden in the deep corners of my room for a couple years. So, I turned it on and let it do it's thing for a couple hours. To my surprise the…Continue
"My lamp has a cap like that, although it's quite a bit smaller. What I did was I used a small screwdriver and carefully pried it open, then I just flattened the edges back to original position after I was done :)"
"i did this before and it helped get the wax down from the top. heat the lamp until the wax is liquid, then turn the globe on the top and let it cool upside down. when the wax hardens, turn the globe back over and heat it. it may…"
"This happened to my Jet. Was an easy fix for a screw top vessel. Drain almost all of the fluid from the lamp into a container for later, leave a little bit in the lamp as a simmer fluid but not too much that it allows that material to stay out of…"
"Yeah, the lamp is dirty as fuck. Might need to clean it as well ;) I'll try to empty the bottle and re-heat the waxes back together someday this week. I'll let you know what happens when all is done :)"
"Bro, that lamp looks like it has seen its better days. Looks as if there is sticking to the glass, cloudy and that floater at top not good signs. You could pop the top, empty most of the fluid into a container save for refill. Then…"
Hey there, I decided to fire up my lava lamp that's been hidden in the deep corners of my room for a couple years. So, I turned it on and let it do it's thing for a couple hours. To my surprise the wax didn't fall down once it made it's way up, most of the wax just floated up and sat there while a little amount of wax was on the bottom.I turned it off and went to bed, next morning the wax was still stuck at the top of the part and it won't come down even after the lamp warms up and it becomes…See More