Oozing Goo - The Lava Lamp Syndicate

Its a 103 series. Early 70s ( cant read the sticker) light blue liquid- teal/sea form green lava. My problem is it almost looks as if this lamp has been shaken to death. the liquid is very cloudy (ive seen worse). Ive heard of cycling the lamp to clear the fluid up. Or conduct a complete fluid change..Im not liking the idea of changing the fluid/lava out. Ive had 2 bad expierences trying to remove the caps on a century..both times resulted in caps breaking. I also would love to keep this lamp original.

Views: 111

Reply to This

Replies to This Discussion

I am in almost the same situation as you. Early 70s Century blue/yellow. Cloudy. Been running it for three days now. 


I have another Century about the same age and did indeed chip the plastic cap trying to get it off. One method that did work for me getting an old cap off another lamp (without breakage) was using a wrench and some sort of rubbery-mat type material. I placed this rubbery/acrylic flexible shelf liner material around the cap then fit the wrench to twist and did it that way. That way, I had a good grip on the cap with the wrench and shelf liner and I didn't crack anything (this time).

 

I'd be up for a fluid change, but I have no other fluid to use. I'm kinda not wanting to mess with it and wondering if I keep running it, if it'll clear up. 

 

Here's mine:

If you give it time, even a few months, it may clear up enough to be enjoyable.  I have been through it also, my lamp in question is mostly clear and the remaining cloudiness actually looks OK.

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2025   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service