Oozing Goo - The Lava Lamp Syndicate

ok, i have this crestworth copper astro. it has a new globe. i need to pry off the top as it seems to be stuck. why do i need to get it off? well the seller emptied the globe before sending it to me. this was my request from this particular seller

Views: 66

Reply to This

Replies to This Discussion

it's a plain metal top. there is no way he glued it on. it's just stuck or jammed on it and i can't pry it off
let me be more clear. the copper top is stuck on the silver cap. i think the only way is to pry it off

i do need to filter another mathmos globe as well but i don't a hair dryer is hot enough. don't craft stores sell heat guns? that would be my best bet i susopect
hot air gun from Home Depot/Lowes/Target should do the trick.
Don't have it too close or the copper will tarnish.

Reply to Discussion

RSS

Latest Activity

Steve Sag and LavaLover are now friends
yesterday
Indiana is now a member of Oozing Goo - The Lava Lamp Syndicate
Wednesday
Profile IconGabby and Max joined Oozing Goo - The Lava Lamp Syndicate
Tuesday
Claude J and IdOrU 02 are now friends
Monday
Claude J replied to GrooEv's discussion 1990 Lava Fluid
Monday
Claude J replied to Tony 's discussion Used grande
Monday
Profile IconShoe and SearchingForDolphins joined Oozing Goo - The Lava Lamp Syndicate
Monday
Tony posted a discussion
Monday

GooHeads

© 2025   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service