Hi all,
I just recently did a goo kit in a 52oz globe. I followed the Goo kit How To to do it. All I am getting for action after two runs on a 40 watt bulb is a dome, if I pop in a 60 watt I get a bit more action out of if but still it's mostly just a pillar that doesn't break off and sometimes barely makes it to the top of the globe. Right now I am pretty close to 17ml of surf and don't really wanna add more although I supposed I could just remove some fluid and add straight distilled to thin it out a bit. Any ideas and what's going on? Bad goo maybe?
Thank in advance.
Tags:
Views: 200
More surf may help, what do you mean about taking some water out and adding distilled water to it as that's what the water should only be.
The other thing that may help is adding some of the epson salt and water mix or adding some PG to it to increase the density of the water - that may improve the flow.
It does take time to agust the globes to a good flow. Taking water out and replacing it with just DI water is really a option if you have added too much of the epson salt for example. If it flows well with a lot of surf then i would just leave it - no need to change something that works etc.
1 |
The Lamp Caretaker |
2 |
Arne |
3 |
LampHead |
4 |
Tori |
5 |
Jump Energy MAN |
6 |
Twinkiebabie |
7 |
Todd |
62 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2024 Created by Autumn. Powered by