Oozing Goo - The Lava Lamp Syndicate

hi everyone, was wondering if anyone had an answer as to what this white powder stuff at the bottom of the globe is? its an older lamp (dated 1971 on inside of cap. it doesnt appear to affect the flow any so far. is this somthing i should be worrying about? can it be or should i mess with cleaning it out somehow. the lamp has never been ran but a handful of times by myself so not sure if it will affect the lamp any down the road. any help is appreciated. thanks!

Views: 1546

Attachments:

Reply to This

Replies to This Discussion

The old Century I have from Grandma had a lot more of that white powder than yours.  The water was super cloudy and the cap was cracked. The cloudy may have been from the bad cap.  The goo was bad and full of bubbles, the flow was not so great.  I tried to clean the powder to see if it would help.  It was stuck to the solid wax bottom and flushing out the cold lamp did not do anything to remove it.  I heated the lamp with distilled water in it and the powder went away/dissolved.  But the goo was still toast.  My experience is very limited, but I would say leave well enough alone.  Grandma ran that Century all the time for decades and I think the powder is a byproduct of the wax breaking down.  I don't think getting rid of it will stop or reverse the damage.  You probably have a lot of good life left in it, and I must also say the gold anodizing and cap paint are a lot less faded than what mine was.  Looks good.

great flow on that lamp for sure! it seems to happen to lamps that are stored for a long time. at least in my experience. i don't think it will affect the flow, but it may start breaking off and entering the wax. i am not entirely sure. does it stick to the glass when the globe is hot, or is it stationary?

thanks Duane and Brad, yes it is stationary, it just sits at the bottom of the globe even when running the lamp. also there is no bubbles in the wax so far. im not sure how long till that will happen, i think this is the color combo that was notorious for that.

since it's stationary, i'd leave it be, especially given how nice the flow is. the process of removing it from the globe may cause other issues like cloudy fluid.

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service