After many months of frustration I have finally figured out the cure for wax sticking to the glass. I am confident that this will work for most people. Its very simple actually. Empty the globe and fill it completely full of gasoline. Let it sit over night, rinse it out with dawn dish soap, then refill the globe with the original contents. When you refill the globe be sure to put a little bit of liquid in it first and swish it around because the gasoline strips the lamp of all surfactant. I usually put half as much liquid in as I put wax in, then once the wax has cooled off and hardened I pour the rest of the liquid back in. When you pour in the wax try not to get it on the sides of the globe. This works so good the wax doesnt even stick to the bottom of the globe.
Thats it. Simple yes?
Tags:
Views: 10115
I wonder if that would also work on that awful film that is on the outside of some of our globes? I've tried soap, windex, you name it, and it just smears around! Highly annoying!
Post some photos, maybe we can figure it out?
It appears that disgusting film is just "there" on a lot of globes and will NOT come off. I don't think anyone ever figured out how to remove it. I'll find that link to the discussion and pics and post it here, thanks!!
I better post it in a new discussion, so as not to hi-jack Autumn's "inside" globe cleaning discussion!!
Innotic, it was under a discussion Deb posted called "Polishing Your Globes," and I just replied to it to bump it up for you. No pics though, but a good description! Sorry, Autumn, for hi-jacking, but this is off your discussion now!
I have my globe filled with gasoline now and when I dump and wash the inside in a couple days...do i need to bake it after? I thought I remember reading that somewhere, but now that I look it doesn't mention it in this thread.
Under what circumstances should you bake your globe after cleaning?
Nevermind....I found it myself since no one responded. I just hope these are good directions.
http://oozinggoo.ning.com/forum/topics/it-just-wont-stop-sticking?c...
Gasoline? When that happens to my lamp i just shake a litle bit and the wax goes down.
Hi yall, noob in here. We have been working on mixing up some lights for over a full year now. No joke, I mixed up over thirty last year. Did the gasoline or sodium trick work and keep working? Sounds like basically the vessel is being stripped clean and then being rinsed with the soap water, leaving a film. I have one light that ran for a month and now its sticking. Do any of you know of any other formulas out there? We are using a lab grade ethylene glycol with lab grade de-ionized water 30/70% mix. Our ooze is Gulf wax / perc, brake clean 66/33% mix. I've had more than a half dozen run really well. I bring them into the proper gravity with the salt, about 6-7 tea spoons. And about 5 drops of free and clear dish soap. They seem to fizzle out or start sticking over time. I'm shooting for a commercial grade, long running mixture. Any other recipes out there....been looking. Cheers all :)
%
I'm sure gasoline works better or at least faster but I also had good results with citric acid. I let it sit for a few days and the use a bottle brush on the inside with half of the bottle still filled with the acid.
Hi I have been able to clean wax residue off of the outside with automotive wax/ grease remover.
Marley's Ghost said:
It appears that disgusting film is just "there" on a lot of globes and will NOT come off. I don't think anyone ever figured out how to remove it. I'll find that link to the discussion and pics and post it here, thanks!!
I better post it in a new discussion, so as not to hi-jack Autumn's "inside" globe cleaning discussion!!
Thanks I will try this later...do you also have a solution for wax NOT sticking to the coil?
use the ethylene glycol, not salt to adjust the density of the fluid. as for the sticking, try using more surfactant.
Johnny said:
Hi yall, noob in here. We have been working on mixing up some lights for over a full year now. No joke, I mixed up over thirty last year. Did the gasoline or sodium trick work and keep working? Sounds like basically the vessel is being stripped clean and then being rinsed with the soap water, leaving a film. I have one light that ran for a month and now its sticking. Do any of you know of any other formulas out there? We are using a lab grade ethylene glycol with lab grade de-ionized water 30/70% mix. Our ooze is Gulf wax / perc, brake clean 66/33% mix. I've had more than a half dozen run really well. I bring them into the proper gravity with the salt, about 6-7 tea spoons. And about 5 drops of free and clear dish soap. They seem to fizzle out or start sticking over time. I'm shooting for a commercial grade, long running mixture. Any other recipes out there....been looking. Cheers all :)
%
1 |
Steve |
2 |
Howy |
3 |
Modulo '70 |
4 |
Cameron Hill |
5 |
The Lamp Caretaker |
6 |
Claude J |
7 |
Michael Smith |
8 |
Anthony Dang |
62 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2024 Created by Autumn. Powered by