Hi Everyone.
I'm new to the forum (and collecting) and was just wondering if someone could point me in the right direction.
I recently bought a Crestworth Astro and it's very cloudy. The wax is dark orange and the water is a pale orange colour. (probably more due to the cloudiness than the original colour).
The wax seems to flow beautifully when it's on, but it's hard to see as the liquid is so far gone.
Anyway, I'd just like some advice. I don't mind attempting to change/filter the liquid but is this possible? If I use liquid from a current Astro would that still work ok with the wax?
If I don't have any luck with that then will a current sized Astro bottle fit? The top seems to be glued on so obviously that will pose problems to start with.
Sorry to ask so many questions but this is a beautiful lamp and I'd love to restore it to former glory if possible. I haven't any pics at the moment but will add some if I can.
Tags:
Views: 115
hey there Nicola
wish i could advise but i'm thinking the crestworth astros used a different formula to the new ones so maybe swapping the fluid would affect the flow.
Not having any myself i'm not a good source of information i'm afraid. People do pump globe fluid to get them clear but i have heard doing so can damage the astro fluid. plus the filters are like proper expensive so maybe swapping the globe would be your best bet. i think they will fit but best to ask Crestworth Limited for advice on that one.
:)
Ok, second question, I'm going to get a new globe for it, but the cap seems to be really well stuck on. Is there a safe way to remove it without damaging anything?
1 |
Arne |
2 |
Steve |
3 |
Howy |
4 |
Modulo '70 |
5 |
Cameron Hill |
6 |
The Lamp Caretaker |
7 |
Claude J |
8 |
Twinkiebabie |
62 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2024 Created by Autumn. Powered by