Tags:
Views: 231
Has it gone thru to the other bottom side?
Thank you, I will try those ideas. What about my other lava lamp that gets TOO hot? :) It has a slightly different design with a 40W bulb. I can post a pic if that would help.
What I end up doing is swapping them over every 10 minutes or so, that way the one that is too hot will cool off and the other one will flow. :)
Bohdan said:
Once a 40w bulb is installed you may have to adjust the socket closer to the globe to the point were it almost makes contact but does not. The socket may also be loose on the bracket that can be bent up some what. At this point I would just leave the rust alone since has gone thru part of the botom plate. Also the bulb will work better if centered in the base. This will have more direct light and heat instead of it being on the outer rim part of the globe.
63 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2025 Created by Autumn.
Powered by