This lamp above was one of my first attempts for the metallic sharpie technique. Been almost a year since this was made and what I've noticed with the metallic wax technique is that it's not permanent. The base of the metallic ink seems to eventually separate a little and stay at the bottom. Now it's being run for 9 months at 8 hours a day 5 days a week may have a effect on the separation or it may not. So I decided to dye the wax red and in the pics below you can clearly see the separation but whats really cool, in a way, that it has a swirling of metallic ink! Reminds me of old school bowling balls lol. Even once in a while a bubble of nothing but ink will burst in the wax and it looks like a firework, its really bizarre but really cool as well.
Tags:
Views: 9528
Great shade of blue....sort of a Periwinkle Blue......very nice!
Beautiful! Does is generally stay in a column like this pic or does it break up more? I really like the column look of this!
Thanks! After running the lamp all day I do see some of the MICA powder building up at the bottom around the coil. I'll have to see how it does over the next few days. The lava still has the metallic bits but it doesn't look as pronounced as it did earlier. I'm guessing it's a combination of less MICA powder in the wax due to settling and the fact that it's night time and not as noticeable without day light. I am hoping that the movement in the lava keeps the MICA from settling.
As far as the powder, I didn't measure it I just kept adding it until I had the look I wanted. I mixed everything in a breaker while heating it.
For the lava, it is a combination of things. I mixed Magma tower lava with homemade lava (approximately a 50/50 mix). For the homemade lava I used paraffin wax, perchlorate (CRC Brakleen), petroleum Jelly, mineral oil and a small amount of glycerin. For the wax dye I used blue liquid wax dye that I bought from Michael's, some solid blue wax dye I got from Amazon and the blue MICA powder (I also got that from Amazon). Making the wax wasn't an exact science and I had to keep tweaking the formula to get the consistency I needed. I wish I could give you exact measurements but it got to be too difficult to keep track of after all the different tweaks. I started with 70% paraffin wax and 30% perchlorate. Then added small amounts of petroleum jelly (half tablespoon at a time) and poured in mineral oil (maybe 5-10 ml at a time). I used the petroleum jelly and mineral oil to help with the consistency and flow of the lava. Then I'd put the lava in a bottle (275 ml for a 52 Oz globe), let it cool in the fridge then add distilled water and mix in the magmatower surfactant (about 15 ml for the 52 Oz globe. Next I'd put it on a base and see how it flowed when heated. If the lava rose to the top without melting I'd add more perchlorate, if it became liquid and stayed at the bottom I'd add more paraffin. Each time I'd tweak it I would remove the lava form the globe and put it in a beaker and heat it while I added ingredients to it. I used the mineral oil and petroleum jelly to help smooth the flow of the lava.
Making homemade lava is a pain in the butt however I wanted to use it because I noticed in the past that the lava seemed to move inside the blobs and I hoped this would keep the MICA from settling.
I have a dimmer on this lamp and find the lava moves inside of the blobs best with medium heat.
It's also worth mentioning that perchlorate is toxic. I would not use it if you don't have a good way to seal the bottle after you are done. I have a bottle capper and capped my bottle each time I filled it. I also made the lava in a well ventilated area.
Dr. WHAT?! said:
That looks awesome! Reminds me of a Mathmos Glitterball.I'm curious on how much mica you put in and do you see the mica settling around the coil at all? Would love to see your step by step on this.
Another option I wanted to try but haven't yet ( I did buy it) is aluminum powder, its used in makeup.
https://www.etsy.com/listing/242478521/silver-aluminum-metallic-pow...
Thank you! I installed an inline dimmer on this lamp and use it to control the heat which affects the flow. I've found that the more heat (light) the more the lava breaks up into balls. Dimming the lamp helps keep it more column like but it seems to cycle between columns and blobs.
Keith said:
Beautiful! Does is generally stay in a column like this pic or does it break up more? I really like the column look of this!
Thanks!
Critter said:
Great shade of blue....sort of a Periwinkle Blue......very nice!
Good morning everyone. I just wanted to give an update on the lamp. All of the MICA has now settled at the bottom around the inside of the spring. The motion of the lava wasn't able to keep it suspended in the wax. If I find another way I'll let everyone know.
I'd say the solution is heavier wax like the glitterballs have it.
I recently tried experimenting with metallic sharpie inside a 32oz Schylling. I used 6.4 oz of MT goo, and 4 metallic sharpies. Prior to adding the sharpies I had mixed Solar Color Dust 'Prismo holographic' it worked for about 2 hours but most of it sank to the bottom, would clot together inside bubbles. It was a cool concept for a rainbow metallic iridescent look, but it just doesn't stay consistently distributed within MT goo. This video was shortly after the color dust was mixed inside a 20oz that I later removed and put inside the 32oz.
I decided to give the sharpies a go since the solar color dust kind of failed. It drastically altered the structure of the goo, would create a long vertical column, most would stay at the top, very hard to separate. Even when dimmed it behaved weirdly. I'm guessing the better choice for globes is 52oz and above?
I noticed that the silver glitterball also looses its shinyness over time and whats left ist almost transparent wax with silver bits inside. I'd like to try and add some silver mica powder to the wax and see if it gets shiny and silver again...didnt see a any of em on ebay for quite a while though.
I'd say this comes pretty close to the glitterball and it still gets better while flowing. Of course it's not as slow and not the typical ball shapes but considering I didnt alter the masterfluid and wax except for the mica powder I'm actually very surprised that it works...I was pretty convinced that it rather kills the lamp or looks like total crap but it even made the century flow way better...before this treatment I only had lots and lots of tiny blobs and I hated it...
I also had the Problem that after an hour or so most of the mica powder had accumulated at the coil but after swapping it with a rubber ring like the glitterballs had them it works pretty well and even after hours of runnig it, the mica powder gets picked up by the flow. Need better more pure mica powder without glitte in it but for now I am satisfied with the result.
1 |
Steve |
2 |
The Lamp Caretaker |
3 |
Modulo '70 |
4 |
Cameron Hill |
5 |
Michael Smith |
6 |
trash cat |
7 |
Angel |
8 |
Drfrumplesteinz |
62 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2024 Created by Autumn. Powered by