Hey everyone.
Still having an issue with my Mathmos Jet.
After been on about 40 mins this is what it's showing.
Really dunno what to do.
It's a 30 Watt bulb in the lamp.
The lamp flowed perfectly in the shop but they made me take the lamp away freshly turned off.
I was SUPER carful and the lamp didn't get shaken at all!
After about 20 mins the yellow one went back to flowing fine so even swapping the bottles made no difference.
I also swapped the bulbs and it made no difference
Meh
The other Jet is flowing.
If I try it on the Nordic base it starts to cool down since it's only a 15W bulb
on the original base it just makes blobs but they dont break and just dome at bottom.
Might leave it for the night and try again tomorrow.
Permalink Reply by john on September 22, 2009 at 2:36pm
I had this same problem, I would say check the coil and that the wax is fully covered in the coil, mine had a bad coil and woundn't flow and looks the same as your pictures.
Permalink Reply by john on September 22, 2009 at 2:48pm
yes when the wax is a liquid, also the heat shield the white plastic coller should be sat on the three clips. also twisting the bottle gently sometimes helps the coil. otherwise don't know.