Oozing Goo - The Lava Lamp Syndicate

I recently made a salt/perc lamp and after a few runs I noticed that small blobs started sticking on the glass.  Can this be corrected with more surfactant or will the globe have to be redone?  It's a 52 oz. and I used about 3-4 drops of Ultra Palmolive Pure + Clear detergent as a surfactant.  I'm wondering why the blobs didn't start sticking on the first run?

Views: 231

Reply to This

Replies to This Discussion

I've heard of folks using regular Dawn detergent. Good enough or do you have a better alternative to that?

Would you still only use 2-3% mineral oil if the water was doped with a glycol instead of salt?

Just so you have a better picture of the contents, I used 1/3 perc and 2/3 candle wax per the simplified retro formula.

Thanks for checking in!
I'll put all that in my bag of tricks and see what comes up. Thanks!

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service