Oozing Goo - The Lava Lamp Syndicate

My lamp the Chinese one always has a plug floating at the top after I shut it off. No probs. I wait till its cool and give it shake to break water tension and it goes to the bottom. But I come back and its back at the top again. This must be because of it being so close to the buoyancy of the water and when the water cools to the point that the wax is lighter it goes back up. Anyone see this? I have seen it at the top and shaken it lightly to make it fall but never seen it rising.

Views: 323

Reply to This

Replies to This Discussion

It happens on occasion.  Also sometimes when it cools that top bit will get air bubbles that make it float.

I wouldn't worry about it to much, most lamps get floaties from time to time. Some more than others.

Reply to Discussion

RSS

Latest Activity

IdOrU 02 replied to IdOrU 02's discussion Looking ffor a lunar cone.
Sunday
The Lamp Caretaker commented on Gijzzz's photo
Sunday
The Lamp Caretaker commented on Gijzzz's photo
Sunday
The Lamp Caretaker replied to Tony 's discussion Used grande
Sunday
Steve Sag and LavaLover are now friends
Friday
Indiana is now a member of Oozing Goo - The Lava Lamp Syndicate
Nov 12
Profile IconGabby and Max joined Oozing Goo - The Lava Lamp Syndicate
Nov 11
Claude J and IdOrU 02 are now friends
Nov 10

GooHeads

© 2025   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service