(Lava Chat)

Problem with air bubbles and how do I cycle a lava lamp?

Hi All! I got my first lava lamp for Christmas and it's a big one. :D It worked beautifully for the first few days and now there are all kinds of bubbles in the lava. I have been searching online for a solution and some places mentioned cycling the lamp? I stumbled onto your site here and you all seem to have good answers to problems. What do I do about the bubbles, and if I need to cycle the lamp...how do I do that? Thanks for you help. :)

▶ Reply to This

Replies to This Discussion

Permalink Reply by Brian on January 4, 2008 at 8:32am

I don't know the severity of the bubbles. could you post a pic of your lamp when it is flowing to see how much bubbles it has?

▶ Reply

Permalink Reply by Lori Whitty on January 4, 2008 at 10:02pm

OK...I have another question...should my water level be all the way to the top of the globe or is it normal for it to be an inch and a half or so low? It's just that it seems like it's when the lava gets to the top...to that pocket of air...that it starts getting the air bubbles that stay in the lava afterward. I'm new at lava lamps, in case you can't tell LOL!!

▶ Reply

Permalink Reply by Lori Whitty on January 4, 2008 at 10:07pm

▶ Reply

Permalink Reply by Roger Stenstrom on January 5, 2008 at 8:34am

Well hope fully some one else could give you a better anser becouse I dont know that much yet. Ok I think it is normal to have that 1 inch at top and when the lamp is hot it will not be an inch it will be smaller. As the lamp heats up the liquid will expand. Well hopfuly some one can let you know if I am right.

Roger