Tags:
Views: 180
If the lamp is inexpensive it would probably be better to buy a replacement.
The wax and water in the lamps needs to be balanced so any changes you make can have an adverse effect, especially large changes (such as a spoon full of wax). It sounds like the wax is now not heavy enough and the water is too heavy. It would probably have been ok to add wax based candle dye, but even that can be tricky. Shaking the globe is never good, and just adding water is not good either. There are ways to fix the lamp if you are determined to do so, there are many here who have done so and I'm sure they will give you proper advice.
GOO'd luck!
If this is a new lamp, it will almost certainly be more expensive to fix it at this point than to buy a replacement. If you want a custom color, you might consider just buying a Goo Kit and whatever dye packs you want. You'll end up replacing the entire contents of the lamp, but it's still cheaper than buying a ceramic filter to clear up the water (assuming it doesn't do so on it's own) and easier than tracking down the necessary ingredients to change the wax's density.
A spoonful of candle dye is WAY too much. That stuff is super concentrated, and adding that much is what caused your problem. :( You can add a little rock salt and distilled water to try and match the new specific gravity, but it might be very tricky.
1 |
cannaunion |
2 |
julian rafalko |
3 |
trash cat |
4 |
VR4 |
5 |
Autumn |
6 |
Claude J |
7 |
Paul |
8 |
Drfrumplesteinz |
61 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
28 members
© 2024 Created by Autumn. Powered by