Oozing Goo - The Lava Lamp Syndicate

Question About My New Crestworth Living Jewel Nordic Deluxe

I just obtained a Living Jewel off ebay, which is still wired for the United Kingdom. I'm trying to rewire to US, but I can't seem to figure out how to open the base up. I don't want to damage it, so any info would greatly be appreciated.

Views: 281

▶ Reply to This

Replies to This Discussion

Permalink Reply by Kirk on January 1, 2016 at 1:42am

Can you post a picture of the base?  I'm guessing you'll need to use a blow dryer or heat gun to get the base loose from the metal edges.  To put it back, you may need to use some glue (epoxy).

Permalink Reply by Ben on January 1, 2016 at 2:41am

Permalink Reply by Kirk on January 1, 2016 at 3:50am

The metal half may also be glued into the base like the older Crestworth Jets.  Look at this discussion, too.  

http://oozinggoo.ning.com/forum/topics/rewiring-a-metal-jet-bottom-...

Permalink Reply by Ben on January 1, 2016 at 1:18pm

Got it thanks for the help Kirk 

Permalink Reply by Kirk on January 1, 2016 at 1:53pm

My pleasure, Ben.

▶ Reply to Discussion

RSS

About

Autumn created this Ning Network.

Top Members 

1 Arne

Arne
2 Steve

Steve
3 Howy

Howy
4 Modulo '70

Modulo '70
5 Cameron Hill

Cameron Hill
6 The Lamp Caretaker

The Lamp Caretaker
7 Claude J

Claude J
8 Todd

Todd

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service