smart astro operation

[Johnny]

not sure if im just heavy handed or cant count seconds, when i touch my pad to switch of it dims so i lift my finger of and before i know it its came back on,  sometimes when it dims right down to of it hasnt gone right of, theres still a little glow,

when finely switched of i always turn the mains of b4 bed, when i switch back on at the mains it flashes one colour, then another , then switches of.

 

is it me or do anyone else have problems with the on/off button

[Johnny]

yes mine gets hot and dont leave any of them transformer plugs switched on if not in use, i still have lots of bubbles n grainy wax which i hope will go with use, i find it funny when its been on hours yet the bottle is luke warm

[babynoggin]

My button is fine I haven't had any trouble with that. My transformer is warm as well but only the same as some of the others I have. I have finally got the wax flowing well but had to put it in front of the fire to do so. My wax is also grainy and even has a couple of large bits in it.

[Susan]

We've found that our transformers get hot, not just warm. When I want to use the lamps I plug them in and when I've finished using them I unplug them to turn them off, then leave them unplugged.

When I plugged them in yesterday, one of the lamps went mad and was flicking from colour to colour, then it settled down.

My second lamp has a loose heating plate, when I first turned it upside down to put the power lead in, the heating plate fell out of the base. I pushed it back in making sure that the wires were clear of the plate as I did it.

[Johnny]

mine did the flicker of colours as well susan, i havent got a loose heating plate

[Susan]

Johnny said:

mine did the flicker of colours as well susan, i havent got a loose heating plate

They might do that as they are sorting the fazing out as they are turned on, it isn't anything I'm worried about.

[LampHead]

Hopefully this is not going to be a problem but it seems there may be issues with the heating plate/transformer by more than one person already. Watch these lamps closely, they should be perfect without flaws.