Oozing Goo - The Lava Lamp Syndicate

hi guy, im must be one of the worst photo takers of all time, has anyone got any tips so that i can improve, how do you light the things up, they always look so rubbish when i try

Views: 94

Reply to This

Replies to This Discussion

sure but postage would be very high
i think its the flash that is the trouble, in daylight its fine pictures come out fair, but you photos always look good,
hi krissy, to get the best quality pic try setting your camera to no flash mode this is on the top round dial, then if you can slow the aperture speed down and raise the iso to 400. lava might look a bit blurry because the shutter will be open longer as the lava movse. use a tripod and taken the next pic with flash on, use the clone tool in photo shop or photo editing software and copy the lava from the flash shot into the first pic. photo should look great. hope this helps. chris
Also you should use a camera with an IR filter in its lens, which most compacts and cell phone cameras do not have, and their sensors pick up IR light (try taking a shot of a remote control's IR led while in use).

For lava lamps this often means that you will get washed out colors and visible IR light e.g. black wax will appear a washed out puple instead of black. This can be limited by using plenty of external light or a strobe light, though.

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service