I had a fun weekend with my lava lamps. Typically they hide in the basement. But this weekend I pulled them out to decorate my front porch.
I also spent time tearing apart 4x lamps. One needs to go into the trash but I keep trying various things, because, why not? 2x that were clear and fine, but had the boring Chinese blob flow. And my Grande which had one of it's two coils snap and straighten out (this essentially broke its flow).
Results:
I've emptied the water and refilled other globes several times. This was the first time I also poured wax out. I think I did this all wrong. Would someone please share their wax empty/refill process?
Tags:
Views: 238
That coil might have to much mass to heat properly
I've refurbished 100's of globes
Attached is a tutorial on how to refurbish a globe
REFURBISHING%20A%20GLOBE.pdf
Great stuff, thank you! In my toying around over the years (we're talking a few lamps, not 100s!), if soap can be used as surf, that the soap would make the lava more stringy and less soap more ball like. Huh, that changes things if not.
Ended up not being the coil that made the flow suck in that Grande. My homemade coil didn't work, so I modified it by putting a base on it (like a small cup). That didn't work. So I added a coil from my trash lamp. That didn't work. So I put some salt water in it, now that worked!
Claude J said:
That coil might have to much mass to heat properly
I've refurbished 100's of globes
Attached is a tutorial on how to refurbish a globe
REFURBISHING%20A%20GLOBE.pdf
that salt won't last and will eventually corrode your coil
Epson salt is reserved for middle school science class experiments
it's best to use propylene glycol to adjust the specific gravity
Brandon said:
Great stuff, thank you! In my toying around over the years (we're talking a few lamps, not 100s!), if soap can be used as surf, that the soap would make the lava more stringy and less soap more ball like. Huh, that changes things if not.
Ended up not being the coil that made the flow suck in that Grande. My homemade coil didn't work, so I modified it by putting a base on it (like a small cup). That didn't work. So I added a coil from my trash lamp. That didn't work. So I put some salt water in it, now that worked!
Claude J said:That coil might have to much mass to heat properly
I've refurbished 100's of globes
Attached is a tutorial on how to refurbish a globe
REFURBISHING%20A%20GLOBE.pdf
1 |
Autumn |
2 |
Paul |
3 |
Drfrumplesteinz |
4 |
The Lamp Caretaker |
5 |
lavalover |
6 |
Heather Updike |
7 |
jonny p |
8 |
Arne |
61 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
28 members
© 2024 Created by Autumn.
Powered by