Oozing Goo - The Lava Lamp Syndicate

Electric plasma lamps

I have had this one lamp for about 10 years and i have no clue where or what to plug this thing into.  I can remember that is had rainbow bolts of electricty.   I have some pictures of everything, i think it is one of those cheap china made lamps...I just have no clue what to plug it into.  Also it is quite foggy (Dusty) and i do not think i can fix that.

Views: 256

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by DinoC on January 6, 2013 at 12:44am

The plug

Attachments:
Permalink Reply by DinoC on January 6, 2013 at 12:51am

Lamp

Attachments:
Permalink Reply by Gwen Williams on January 6, 2013 at 1:09am

I have one of these as well, it was never clear, there should be a 2nd part of the chord that hooks into the 2 prong part that converts the round plugs into normal wall type plugs.  I can look in the morning to see if I can get to mine easily to take a picture

Permalink Reply by Loren on January 6, 2013 at 1:13pm

Permalink Reply by Gwen Williams on January 6, 2013 at 3:59pm

well now, Loren beat me to it

Permalink Reply by Loren on January 6, 2013 at 4:11pm

Sorry Gwen, :p I happened to have one sitting 3 feet from me!

Permalink Reply by Gwen Williams on January 6, 2013 at 4:14pm

that's fine lol, mine is back in the storage room and near the back if i remember right

Permalink Reply by Coolsox on January 6, 2013 at 4:52pm
The dusty coating is a phosphor and is supposed to be there. As the plasma streamer runs over it, it causes the phosphor to glow.

▶ Reply to Discussion

RSS

About

Autumn created this Ning Network.

Top Members 

1 The Lamp Caretaker

The Lamp Caretaker
2 Arne

Arne
3 Steve

Steve
4 Howy

Howy
5 Cameron Hill

Cameron Hill
6 Twinkiebabie

Twinkiebabie
7 Modulo '70

Modulo '70
8 Claude J

Claude J

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service