Oozing Goo - The Lava Lamp Syndicate

Apologies if this has been asked before, is it as simple as transferring fluid from one bottle to another, heat until the wax starts flowing before sealing the bottle?

Any advice would be much appreciated, thanks 

Views: 90

Reply to This

Replies to This Discussion

Yes sir. Also be careful that the glue which secures the cap doesnt  fall into the bottle and maybe filter the fluids...mathmos might have the clearest fluids but thats still not crystal clear.

 Oh and if theres bubbles attached to the wax, shake them off or wax might stick to the bottle where bubble was.

If the wax crashes down while pouring out the fluid, dont worry, the smear will fix itself when running.

Thank you, Arne. 

Arne said:

Yes sir. Also be careful that the glue which secures the cap doesnt  fall into the bottle and maybe filter the fluids...mathmos might have the clearest fluids but thats still not crystal clear.

 Oh and if theres bubbles attached to the wax, shake them off or wax might stick to the bottle where bubble was.

If the wax crashes down while pouring out the fluid, dont worry, the smear will fix itself when running.

Reply to Discussion

RSS

About

Autumn created this Ning Network.

GooHeads

Groups

© 2024   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service