Oozing Goo - The Lava Lamp Syndicate

Apologies if this has been asked before, is it as simple as transferring fluid from one bottle to another, heat until the wax starts flowing before sealing the bottle?

Any advice would be much appreciated, thanks 

Views: 106

Reply to This

Replies to This Discussion

Yes sir. Also be careful that the glue which secures the cap doesnt  fall into the bottle and maybe filter the fluids...mathmos might have the clearest fluids but thats still not crystal clear.

 Oh and if theres bubbles attached to the wax, shake them off or wax might stick to the bottle where bubble was.

If the wax crashes down while pouring out the fluid, dont worry, the smear will fix itself when running.

Thank you, Arne. 

Arne said:

Yes sir. Also be careful that the glue which secures the cap doesnt  fall into the bottle and maybe filter the fluids...mathmos might have the clearest fluids but thats still not crystal clear.

 Oh and if theres bubbles attached to the wax, shake them off or wax might stick to the bottle where bubble was.

If the wax crashes down while pouring out the fluid, dont worry, the smear will fix itself when running.

Reply to Discussion

RSS

Latest Activity

Brian J updated their profile
yesterday
Brian J commented on Autumn's photo
yesterday
Brian J is now a member of Oozing Goo - The Lava Lamp Syndicate
yesterday
Modulo '70 commented on andy ross's photo
yesterday
John Dibelka is now a member of Oozing Goo - The Lava Lamp Syndicate
Wednesday
Doug Millhoff commented on Fletch's blog post What else could float inside a lava lamp?
Apr 27
Profile IconAng and Doug Millhoff joined Oozing Goo - The Lava Lamp Syndicate
Apr 27
Profile IconJerica and Tandy joined Oozing Goo - The Lava Lamp Syndicate
Apr 23

GooHeads

© 2025   Created by Autumn.   Powered by

Badges  |  Report an Issue  |  Terms of Service