Apologies if this has been asked before, is it as simple as transferring fluid from one bottle to another, heat until the wax starts flowing before sealing the bottle?
Any advice would be much appreciated, thanks
Tags:
Views: 90
Yes sir. Also be careful that the glue which secures the cap doesnt fall into the bottle and maybe filter the fluids...mathmos might have the clearest fluids but thats still not crystal clear.
Oh and if theres bubbles attached to the wax, shake them off or wax might stick to the bottle where bubble was.
If the wax crashes down while pouring out the fluid, dont worry, the smear will fix itself when running.
Thank you, Arne.
Arne said:
Yes sir. Also be careful that the glue which secures the cap doesnt fall into the bottle and maybe filter the fluids...mathmos might have the clearest fluids but thats still not crystal clear.
Oh and if theres bubbles attached to the wax, shake them off or wax might stick to the bottle where bubble was.
If the wax crashes down while pouring out the fluid, dont worry, the smear will fix itself when running.
1 |
The Lamp Caretaker |
2 |
Arne |
3 |
LampHead |
4 |
Jump Energy MAN |
5 |
Twinkiebabie |
6 |
Todd |
7 |
Steve |
8 |
Cameron Hill |
62 members
18 members
19 members
21 members
48 members
9 members
21 members
7 members
39 members
124 members
© 2024 Created by Autumn. Powered by